Specifications

5 Self-Diagnosis Function PJ-1614NXE PJ-2216NXE Maintenance Manual
5-46
5.9.2 PF Motor Endurance Menu
This menu performs endurance running for the PF motor.
You can drive the PF motor according to your desired settings. The available settings are shown below.
TIP
• The motor drive parameters are determined as follows depending on the paper feed amount.
• If the number of endurance running cycles is set to -1, the PF motor continuously repeats endurance running until
a key input is given from the operation panel.
• The maximum counter value for endurance running cycles is 99999999 (up to 8-digit number). If the number of
cycles exceeds the maximum value, the counter is reset to 0.
Table 5-14 Set Items in PF Motor Endurance Menu
Set item Contents Set value Remark
Paper feed amount Set the paper feed amount per
endurance running cycle
0.1 to 100 Unit: mm
Number of endurance running
cycles
Set the number of endurance
running cycles
-1 to 10000