Specifications

5 Self-Diagnosis Function PJ-1614NXE PJ-2216NXE Maintenance Manual
5-30
5.5.11Software Counter Initialization Menu
This menu initializes the software counters such as the ink amount counter.
NOTE
Before delivery, always initialize the software counters.
The software counters that can be initialized through this menu are as follows.
Pressing the Confirm key in the operation panel performs the software counter initialization. Pressing
the Cancel key cancels the initialization.
5.5.12Feed Pitch Check Menu
In this menu, you can check the paper feed amount for one band by reviewing a sample drawing.
To check the feed pitch, follow the steps below.
Set paper as necessary.
After paper is set, the machine prints out feed pitch check patterns in the following modes.
1 pass single way
NOTE
Pressing the Cancel key in the operation panel during the printout causes the machine to stop the printout.
Check the printed feed pitch check patterns.
Table 5-8 Software Counters Initialized
Counter Initial value
Ink amount counter 0
Cumulative printout timer 0
Initial ink charge flag 1