Specifications

5 Self-Diagnosis Function PJ-1614NXE PJ-2216NXE Maintenance Manual
5-22
5.5.5 Two-Way Printing Position Alignment Menu
This menu is used to align the head positions for two-way printing.
To align the head position for two-way printing, you must first print out a Bi-D drawing and identify the
difference between the CW printing position and the CCW printing position. Then, you enter the
difference for the relevant parameter.
The actual procedure is as follows.
1. Set paper as necessary
2. After paper is set, the machine prints out two-way printing position alignment patterns.
3. Check the printed two-way printing position alignment patterns for the following points.
Table 5-6 Adjustment Items and Drawing Mode
Item Contents
No.1 head 1 Bi-D adjustment for No.1 head, head gap: LOW
No.1 head 2 Bi-D adjustment for No.2 head, head gap: LOW
No.1 head 3 Bi-D adjustment for No.3 head, head gap: LOW
No.1 head 4 Bi-D adjustment for No.4 head, head gap: LOW
No.2 head 1 Bi-D adjustment for No.1 head, head gap: MIDDLE
No.2 head 2 Bi-D adjustment for No.2 head, head gap: MIDDLE
No.2 head 3 Bi-D adjustment for No.3 head, head gap: MIDDLE
No.2 head 4 Bi-D adjustment for No.4 head, head gap: MIDDLE
No.3 head 1 Bi-D adjustment for No.1 head, head gap: HIGH
No.3 head 2 Bi-D adjustment for No.2 head, head gap: HIGH
No.3 head 3 Bi-D adjustment for No.3 head, head gap: HIGH
No.3 head 4 Bi-D adjustment for No.4 head, head gap: HIGH
No.1 ALL Prints by all heads with the LOW head gap
No.2 ALL Prints by all heads with the MIDDLE head gap
No.3 ALL Prints by all heads with the HIGH head gap
ALL Prints by all heads with all head gaps
Exit Exit the menu