Specifications

5 Self-Diagnosis Function PJ-1614NXE PJ-2216NXE Maintenance Manual
5-20
5.5.4 Head Inclination Check Menu
This menu prints out a sample drawing to check for head inclination.
To perform head inclination check, follow the steps below.
1. Set paper as necessary.
2. After paper is set, the machine prints out head inclination check patterns in the following modes.
• 1 pass, single way
• PF: 180dpi, CR: 360dpi
NOTE
Pressing the Cancel key in the operation panel during the printout causes the machine to stop the printout.