Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 5 Self-Diagnosis Function
5-19
NOTE
Pressing the Cancel key in the operation panel during the printout causes the machine to stop the printout.
3. Check the printed head nozzle check patterns for the following points.
• Ink nozzle discharge amount (omission, discontinuity, meandering)
• Satellite
• T fence
• Nozzle alignment in vertical direction
• Nozzle alignment in horizontal direction
Nozzle check: Prints out patterns in the order of K, C, M, and Y.
Nozzle alignment in vertical direction: Prints out patterns in the order of K, C, M, and Y.
NOTE
An 87-inch spec prints out patterns in the order of K, C, Lc, M, Lm, and Y.
4. If any abnormal conditions are found in the ink discharge status of the head nozzles, perform ink
purge on the relevant heads.
TIP
"5.6Purge Menu"
5. After the ink purge, the system returns to the purge selection menu.