Specifications

5 Self-Diagnosis Function PJ-1614NXE PJ-2216NXE Maintenance Manual
5-18
2. The system identifies the voltage rank of the head applicable to the entry and then performs initial
filling.
NOTE
The ink colors light cyan and light magenta are only available with a 87-inch spec.
5.5.3 Head Nozzle Check Menu
In this menu, you can check if the head nozzles, after refilled, can discharge ink correctly by printing a
sample drawing.
To print out head nozzle check patterns, follow the steps below.
1. Set paper as necessary.
2. After paper is set, the machine prints out head nozzle check patterns in the following modes.
• 1 pass, single way
• PF: 180dpi
• CR: 180dpi