Specifications

5 Self-Diagnosis Function PJ-1614NXE PJ-2216NXE Maintenance Manual
5-16
5.5 Adjustment Menu
In this menu, you can align the printing position and correct the paper feed operation.
The Adjustment menu includes the following diagnosis menus.
Table 5-4 Diagnosis Items in Adjustment Menu
Diagnosis item Contents Reference
Skew check Performs paper feed and detects the degree of skew in paper feed
by the sensor.
5.5.1 Skew Check Menu
Voltage input To this item, enter the characteristic value of the printer heads in
use. After the entry, refill ink.
5.5.2 Voltage Input
Menu
Head nozzle check Prints out a drawing to check the ink discharge performance of the
head nozzles.
5.5.3 Head Nozzle Check
Menu
Head Inclination Check Prints out a drawing to check for printer head inclination.
Mechanical adjustment must be performed as necessary.
5.5.4 Head Inclination
Check Menu
Two-way printing
position alignment
Prints out a drawing to align the two-way printing position.
5.5.5 Two-Way Printing
Position Alignment Menu
CW adjustment Prints out a drawing to adjust any gaps between the heads.
5.5.6 CW Adjustment
Menu
Band feed correction Prints out a drawing to correct the paper feed amount for each pass.
5.5.7 Band Feed
Correction Menu
Test printing Prints out a nozzle check pattern and the adjustment variables.
5.5.8 Test Drawing
Menu
Side margin Prints out a drawing to adjust the side margin.
5.5.9 Side Margin Menu
Head cleaning Cleans the tubes and heads using cleaning fluid.
5.5.10 Head Cleaning
Menu
Software counter
initialization
Clears various software counters.
5.5.11 Software Counter
Initialization Menu
Feed pitch check Used to check the paper feed amount for one band.
5.5.12 Feed Pitch Check
Menu