Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 5 Self-Diagnosis Function
5-1
5 Self-Diagnosis Function
5.1 Introduction
This chapter provides information on the self-diagnosis function.
The self-diagnosis function adjusts the drawing accuracy. It is used in the manufacturing process,
adjustment, and maintenance.
The self-diagnosis function is implemented in the system firmware. All functions are available from the
operation panel.
TIP
"2.3 Part names and functions"
5.2 Preparation
Before you can use the self-diagnosis function, you must make the machine ready for that and call up
the self-diagnosis menu.
5.2.1 Preparations on Machine
Before starting up the self-diagnosis function, perform the following preparations.
(1) Setting printing paper
Set a roll paper for adjustment.
NOTE
• Make sure to use coated paper for the adjustment purpose.
(2) Connecting power cable
Connect the power cable to the machine’s inlet assembly and insert the power plug into an outlet.
NOTE
Do not connect three or more power plugs to one outlet.