Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 4 Part Replacement
4-77
13. Remove the two retaining screws for the small gear and remove the small gear.
14. Replace the limiter gear.
15. Replace the limiter spring.
16. To install the removed components, reverse the removal procedure.
(2) 87-inch model
1. Remove the TERM_ROLL board assembly following the instructions in "4.10.1 Replacing
TERM_ROLL Board Assembly".
2. Disconnect the winding motor connector.
3. Remove the three screws retaining the winding motor bracket.
No. Part name
1Snap
2 Limiter shaft
3 Gear (small)
4 Retaining nut
5Mini keeper
6 Limiter gear
7 Limiter spring
5
1
6
7
3
2
4