Specifications

4 Part Replacement PJ-1614NXE PJ-2216NXE Maintenance Manual
4-74
4. Remove the winding unit cover.
5. Disconnect the connectors from the TERM_ROLL board assembly.
6. Remove the four screws retaining the TERM_ROLL board assembly.
7. Replace the TERM_ROLL board assembly.
8. To install the removed components, reverse the removal procedure.
(2) 87-inch model
1. Remove the four screws retaining the roller cover1 and roller cover 2.
2. Remove the four screws retaining the winding motor cover.
No. Part name
1 TERM_ROLL board assembly-retaining screw (M3×8)
2 TERM_ROLL board assembly
No. Part name
1 Screw retaining roller cover1 and roller cover 2, screw retaining
winding motor cover (M4×8)
2 Roller cover 1
3 Roller cover 2
4 Winding motor cover
1
2
1
2
3
4
1