Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 4 Part Replacement
4-73
4.10 Replacement of Wind Roller Section
Components
This section describes the procedures to replace the TERM_ROLL assembly, sensor assembly, and
winding unit components.
4.10.1Replacing TERM_ROLL Board Assembly
(1) 64-inch model
1. Remove the two screws retaining the roller cover.
2. Remove the roller cover.
3. Remove the four screws retaining the winding unit cover.
No. Part name
1 Roller cover-retaining screw (M4×8)
2 Roller cover
No. Part name
1 Winding unit cover-retaining screw (M3×8)
2 Winding unit cover
1
2
1
2