Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 4 Part Replacement
4-67
2. Remove the one screw retaining the speed controller bracket.
3. Remove the speed controller bracket.
4. Remove the two screws retaining the throttle valve to the speed controller bracket.
5. Replace the throttle valve.
6. To install the removed components, reverse the removal procedure.
4.8.12Replacing Nipple
1. Remove the throttle valve following the instructions in "4.8.11 Replacing Throttle Valve".
2. Press the portion indicated by the arrow "3" in the following figure to remove the nipple.
No. Part name
1 Speed controller bracket
2 Speed controller bracket-retaining screw (M3×5)
3 Throttle valve
No. Part name
1 Speed controller bracket
2 Screw retaining throttle valve to speed controller bracket (M3×16)
3 Throttle valve
1
2
3
1
2
3