Specifications

4 Part Replacement PJ-1614NXE PJ-2216NXE Maintenance Manual
4-64
2. Remove the two screws retaining the PRESS_SENSE board assembly.
3. Replace the PRESS_SENSE board assembly.
4. To install the removed components, reverse the removal procedure.
4.8.8 Replacing TERM_PUMP Board Assembly
1. Remove the air chamber following the instructions in "4.8.5 Replacing Air Chamber".
2. Disconnect the connectors from the TERM_PUMP board assembly.
No. Part name
1 Tube
2 PRESS_SENSE board assembly-retaining screw (M3×6)
3 PRESS_SENSE board assembly
No. Part name
1Air chamber
2 TERM_PUMP board assembly-retaining screw (M3×6)
3 TERM_PUMP board assembly
3
1
2
2
3
1
2