Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 4 Part Replacement

4-63

2. Remove the four screws retaining the air chamber.

3. Replace the air chamber.

4. To install the removed components, reverse the removal procedure.

4.8.6 Replacing Two-way Valve

1. Disconnect the two-way valve connector from the TERM_PUMP board assembly.

2. Disconnect the tubes from the two-way valve.

3. Remove the two screws retaining the two-way valve.

4. Replace the two-way valve.

5. To install the removed components, reverse the removal procedure.

4.8.7 Replacing PRESS_SENSE Board Assembly

1. Disconnect the connector and tubes from the PRESS_SENSE board assembly.

No. Part name

1Tube

2 Two-way valve-retaining screw (M3×4)

3Two-way valve