Specifications

4 Part Replacement PJ-1614NXE PJ-2216NXE Maintenance Manual
4-60
6. Replace the ink pump.
7. To install the removed components, reverse the removal procedure.
4.8.2 Replacing Air Pump
1. Disconnect the air pump connector from the TERM_PUMP board assembly.
2. Remove the tubes from the air pump.
3. Remove the four screws retaining the air pump.
4. Replace the air pump.
5. To install the removed components, reverse the removal procedure.
No. Part name
1 Ink pump
2 Ink pump-retaining screw (M3×5)
No. Part name
1 Tube
2 Air pump-retaining screw (M3×8)
3Air pump
1
2
2
3
1