Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 4 Part Replacement

4-59

4.8 Replacement of Ink Supply Section Components

NOTE

Before replacing a component of the ink supply section, remove the pump cover.

• "4.2.9 Removing Pump Cover"

Before replacing a component of the ink supply section, perform ink purge to discharge ink from all ink

lines.

TIP

"5.5.10 Head Cleaning Menu"

4.8.1 Replacing Ink Pump

1. Disconnect the ink pump connector from the TERM_PUMP board assembly.

2. Disconnect the tubes from the ink pump.

3. Remove the two screws retaining the pump bracket.

4. Remove the pump bracket.

5. Remove the two screws retaining the ink pump.

No. Part name

1Tube

2 Pump bracket-retaining screw (M3×5)

3 Pump bracket