Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 4 Part Replacement
4-57
9. Replace the three-way valve.
10. To install the removed components, reverse the removal procedure.
4.7.5 Replacing CR Cursor Assembly
1. Remove all head assemblies following the instructions in "4.6.2 Replacing Head Assembly".
2. Remove the P_EDGE sensor assembly following the instructions in "4.6.4 Replacing P_EDGE
Sensor Assembly".
3. Remove the steel belt following the instructions in "4.5.1 Replacing Steel Belt".
4. Remove the CR_ENC assembly following the instructions in "4.7.3 Replacing CR_ENC Assembly".
5. Lift the CR board bracket and head assembly together.
6. Remove the two CR blade springs.
7. Replace the CR cursor assembly.
8. To install the removed components, reverse the removal procedure.
4.7.6 Replacing Cursor Roller
1. Remove the CR cursor assembly following the instructions in "4.7.5 Replacing CR Cursor
Assembly".
2. Remove the one E ring retaining the cursor roller.
2 Three-way valve-retaining screw (M3×5)
No. Part name
1 CR blade spring
2 CR cursor assembly
No. Part name
1
2