Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 4 Part Replacement
4-55
5. Lift the CR board bracket and remove the two CR_ENC assembly-retaining screws by accessing
them from the back.
6. Replace the CR_ENC assembly.
7. To install the removed components, reverse the removal procedure.
NOTE
When removing the CR_ENC assembly, exercise extreme caution not to damage the T fence.
No. Part name
1 CR board bracket
2 CR board bracket-retaining screw (M3×8)
3 Sub tank assembly
No. Part name
1 CR_ENC assembly
2 CR_ENC assembly-retaining screw (M2×12)
3
1
2
2
1
2