Specifications

4 Part Replacement PJ-1614NXE PJ-2216NXE Maintenance Manual
4-52
3. Remove the six brass spacers retaining the CR_HEAD board assembly.
4. Replace the CR_HEAD board assembly.
5. Disconnect the connectors shown in the following table from the CR_BASE board assembly.
CAUTION
•
••
• When connecting and disconnecting the FFC type cables to/from the CR_BASE
board assembly connectors, always pull or push the cables straightforwardly.
Pulling or pushing them slantwise may damage/short/break the terminals in the
connectors, resulting in breakdown of the on-board devices.
3 J3 30 White SUB board Lock type
4 J4 16 White HEAD board
5 J5 30 White SUB board Lock type
6 J6 16 White HEAD board
7 J7 30 White SUB board Lock type
8 J8 16 White HEAD board
9 J9 30 White SUB board Lock type
10 J10 16 White HEAD board
11 J11 30 White SUB board Lock type
12 J12 16 White HEAD board
No. Part name
1 CR_HEAD boardAssy
2 Brass spacer
Table 4-6 Connectors to CR_HEAD Board Assembly (Continued)
No. Connector No. # of pins
Colo
r
Connect to Remark