User`s guide

Operations Instruction Osprey 75/102/130
83 AP-75720, Rev. 2.0 - 28/11/2007
6.4 OPERATIONS AFTER PRINTING
6.4.1 Roll media cutting procedure
Be sure to read and understand the safety warnings before handling the printer.
After printing, the roll media will automatically advance to the media cut position.
The following message is displayed on the operation panel:
Cut the roll media according to the following procedures.
(1) When "Manual" has been selected in the media cut menu
Step 1: Open the front cover.
Step 2: Place a razor blade on the media cut groove on the platen, and cut the roll media.
Step 3: Close the front cover.
Step 4: Press the [ENTER] key of the control panel.
• The unit enters the normal status.
Downloaded From ManualsPrinter.com Manuals