User`s guide

Operations Instruction Osprey 75/102/130
AP-75720, Rev. 2.0 80
6.3 OPERATION PANEL DURING PRINTING
When sending a file to your printer, following messages can be displayed.
6.3.1 Parameter change
Step 1 : Verify that the printer is in the following operations.
• Receiving data
• Analysing data
• Printing data
Step 2 : Press the [F3] key on the operation panel to shift to the Parameter menu.
Step 3 : Press the [F1] key or the [F4] key in the ‘Parameter’ menu on the operation panel.
• The printer performs following operations:
Setup items Parameters Descriptions
Heater
Perform following operations.
• Checking heater temperature
• Setting each heater temperature
Dist Adj. Change media feed compensation value.
Parameter
–
• [CANCEL] key: Returns to the normal status.
Step 4 : Adjust the parameters of the heaters or media feed. See below for further explanation.
Downloaded From ManualsPrinter.com Manuals