User`s guide

Operations Instruction Osprey 75/102/130
AP-75720, Rev. 2.0 76
6.2.3 [F3] – Winding the roll media
Perform winding of the media according to the procedure below.
Step 1: Verify that the printer is not printing
Step 2: Press the [F3] key on the control panel. See below.
Step 3: Press the appropriate key in the ‘Feed&Reel’ menu, press [F1] key to [F4] key or the down key to
shift to the second ‘Feed&Reel’ menu.
• The printer works as follows:
Feed&Reel (1/2)
Feed&Reel (2/2)
Setup items Parameters Descriptions Remarks
F. Order
The winding unit rotates in
the advance direction.
The roll media will be wound
up by the winding unit.
F. Reverse
The winding unit rotates in
the reverse direction.
The roll media will be
unrolled back out of the
winding unit.
This function is displayed when
"ON" is selected in the Winding
unit menu.
Refer to: “Winding unit menu“
Forward Feeds media forward.
This function is displayed when
the media is set.
Backward Feeds media backward.
This function is displayed when
the media is set.
Feed & Reel
R. Reverse
The feed unit rotates in the
reverse direction.
The roll media will be
unrolled back out of the
feed unit.
This function is displayed when
the pressure roller is up.
Notes
• When selecting "R. Reverse" to rewind the roll media, not to over-rewind.
The scroller may come up from the winding unit and drop out.
Notes
• The Operating directions of the winding unit and the roll media are shown below.
Downloaded From ManualsPrinter.com Manuals