User`s guide

Operations Instruction Osprey 75/102/130
71 AP-75720, Rev. 2.0 - 28/11/2007
Step 2: Push the [F1] key on the operation panel to perform printing by media feed compensation.
Step 3: When printing with media feed compensation has been finished, push the [CANCEL] key on the
operation panel.
Step 4: Press the [F2] key of the control panel to change the media feed value.
Step 5: Push the [F2] key or [F4] key on the operation panel to increase (+) or decrease (-) the media feed
value, using the print result, examples shown below.
No adjustment needed Decrease media feed (-) Increase media feed (+)
Step 6: Push the [ENTER] key on the operation panel to save the adjusted value.
• After setting, shift to the previous upper menu.
Step 7: Repeat Step 2 to Step 7 until a good print result has been obtained.
Downloaded From ManualsPrinter.com Manuals