User`s guide

Operations Instruction Osprey 75/102/130
AP-75720, Rev. 2.0 66
No. Evaluation Item Evaluation Method Criteria
11
Damage, wrinkle,
stain,
foreign materials
on media
Confirm media visually.
No damage, wrinkle, stain, and foreign
materials on media.
12
Cardboard core
I.D.
Confirm card board core visually.
• Diameter: 3". (tolerance:±3mm) •
• Length: Max. 2640mm
• Projection from the edge of roll
• media:
o Right: Max. 25 mm
o Left: Max. 25 mm
• Full insertion of scroller to media
flange.
• No slipping
13 Curl Confirm media visually.
• No float by the curl when sticking
media to the media guide.
• No friction with the print head
nozzle during printing.
14 Scuffing Confirm media visually.
No scuffing on media surface and edge
face.
5.1.6 Installing media retainers
Variations in quality and used conditions could cause the edges of the media to curl, resulting in damage to the
media by the print head surface. To prevent this, use the media retainers to reduce curling of the media.
Use the following procedure to install the media retainers.
Handling the media retainers:
When installing and removing the media retainer, handle it as shown in the figure below.
Mishandling the media retainer could result in bent metal parts that interfere with the print head.
No. Name
1 Media retainer
Downloaded From ManualsPrinter.com Manuals