User`s guide

Operations Instruction Osprey 75/102/130
AP-75720, Rev. 2.0 40
Step 13 : Press the [CANCEL] key on the operation panel.
• The operation panel returns to the normal condition.
Notes
• When using a winding unit, follow "Setting winding unit" and set the roll media to the winding unit.
Step 14 : Press the [F2] key on the control panel to lower the pressurizing roller.
• The MEDIA SET lamp goes OFF.
Step 15 : Close the front cover.
Notes
• If you load a new tube of roll media, the media end may not be straight. If so, cut the end of the roll
media.
Refer to: "Roll media cutting procedure" to cut the roll media.
Step 16 : The media initial menu is displayed on the control panel.
Notes
• When changing the media type, follow “Setting media type" to set the media type.
3.2.4 Setting winding unit
When using the winding unit, set up the winding unit according to the following procedure.
Notes
• When using the winding unit, always load the media before printing.
Step 1 : Attach the media tube to the scroller for the winding unit. (Refer to: Placement of the roll media)
Notes
• When using the winding unit, always use the media tube attached to the product.
Notes
• When a winding unit is fixed, it fixes pressing a winding unit against a product side.
• Refer to: Placement of the roll media “step 5”
Downloaded From ManualsPrinter.com Manuals