User guide

used is minimal in comparison to normal printing and as such is used not taken
into account when calculating ink cost per square foot.
Q: How much ink will I use when printing an image?
A: This again can be hard to calculate. Many things must be taken into account,
the resolution being printed, whether it is fixed or variable dot, the type of image
(is there a lot of solid fills, dark colors or a photo type print). One easy way to get
a very precise number is by ripping a file using ISIS Print Manager (Mutoh’s own
software that is included with the printer) A function in the output menu will not
only tell you exactly how many milliliters of each separate color were used, but by
inputting the Retail price of the ink cartridge will tell you to the penny how much
your print will cost. A simple mathematic conversion can also give you cost per
square foot for any and every print you produce.
Q: What Temps do I use for my media on the Falcon II Outdoor?
A: Due to slight variations from printer to printer, differences in ambient
conditions, and minor inconsistencies in media from lot to lot there are no
standard temperature settings for a particular media type. In order to combat
this, Mutoh America has developed a process for determining both the proper
temperature settings for your individual printer as well as what resolutions will
work well for a particular media. This procedure is known as the MOG or Media
Optimization Guide. It can be downloaded as a ‘zip’ file from Mutoh’s FTP site
ftp.mutoh.com
. The MOG consists of a series of test files, one for each of the
major print resolution options, the new improved distance adjustment file, and a
PDF file explaining how to use these files to achieve the best print quality
possible.
Related Questions: What is the fastest print mode I can print with good print
quality? As stated above the MOG will not only help determine what the best
heater settings are, but also the optimum print modes for a given media type.
Q: What type of media can I run on the Falcon II Outdoor?
A: Contrary to some marketing slogans the Falcon II Outdoor cannot print on
‘ANY and ALL’ uncoated media. It can however print on most standard uncoated
vinyl, banner materials and solvent coated papers. For list of recommended
media please visit Mutoh’s web site at
www.mutoh.com
. Remember however,
that just because a media is on the recommended list does not mean it will print
perfectly right out of the box. Ensure that the RIP you are using has a profile for
that particular media, and most of all don’t forget to perform the MOG tests to
ensure optimum heat, resolution, and distance adjustment settings.