Specifications

Falcon II Outdoor series printers – Maintenance Manual

AP-74065, Rev. 1.0, 21/11/03

4.6.4. Replacing the T fence

Notes :

¾ Remove following covers before replacing the T fence.

 Side cover R: refer to "Removing side cover R"

 Side cover L: refer to "Removing side cover L"

 Front cover: refer to "Removing the front cover"

 Carriage cover: refer to "Removing the carriage cover"

 Y rail cover: refer to "Removing the Y rail cover"

Step 1 : Remove the T fence from the T fence spring hook on the side of the L side frame.

Falcon II Outdoor 2 heater Falcon II Outdoor 4 heater

1 = T fence spring 2 = T fence spring hook

3 = T fence

Step 2 : Remove the screw fixing the T fence push plate.

1 = T fence push plate 2 = Screw (M3x6) fixing the T fence push plate

3 = T fence

Step 3 : Remove the T fence from the hook.