Specifications

Falcon II Outdoor series printers – Maintenance Manual

AP-74065, Rev. 1.0, 21/11/03

1 = Lever motor assembly 2 = Hexagon socket head screws with spring

washers (M4x10)

Step 5 : Replace the CR motor assembly.

Step 6 : Remove the hexagon socket head screws with spring washers (2) fixing the arm motor installation board.

1 = Arm motor installation board 2 = Hexagon socket head screws with spring

washers (M4x10)

Step 7 : Replace the arm motor installation board.

Step 8 : Reinstall all parts in the opposite order of the removal procedure.