Specifications

Falcon II Outdoor series printers – Maintenance Manual
66
AP-74065, Rev. 1.0, 21/11/03
Step 13 : Stick (with silicone glue) the two press plates onto the heater strip.
¾ 50” model : X = 380 mm
¾ 64” model : X = 380 mm / Y = 1060 mm
¾ 87” model : X = 660 mm / Y = 1200 mm / Z = 1750 mm
Notes :
¾ It will take ± 1 hour to let the glue dry.
Step 14 : Reinstall all parts in the opposite order of the removal procedure.
Notes :
¾ During reinstallation of the plate, make sure there are no cables stuck.