Specifications

Falcon II Outdoor series printers – Maintenance Manual

AP-74065, Rev. 1.0, 21/11/03

4.2.9. Removing rear paper guide

Step 1 : Remove side cover L.

Step 2 : Remove side cover R.

Step 3 : Remove the front cover.

Step 4 : Remove the Y rail cover.

Step 1 : Remove the screws from the top of the rear media guide.

Notes :

¾ Please note that the amount of screws is size dependent.

1 = Screws on the rear paper guide

Step 2 : Remove the screws from the rear of rear paper guide.

Notes :

¾ Please note that the amount of screws is size dependent.

Step 3 : Standing at the rear of the unit move the rear paper guide towards you.

Step 4 : Loosen the cables from their cable clamps.

Step 5 : Carefully loosen the connectors