Specifications

Falcon II Outdoor series printers – Maintenance Manual

AP-74065, Rev. 1.0, 21/11/03

4.2.8. Removing front paper guide

Step 1 : Remove side cover L.

Step 2 : Remove side cover R.

Step 3 : Remove the front cover.

Step 4 : Remove the carriage cover.

Caution :

Please note that this cover is only on a Falcon II Outdoor (2 heaters) printer.

Step 5 : Remove the Y rail cover.

Step 6 : Remove the screws from the top of front media guide.

Notes :

¾ Please note that the amount of screws is size dependent.

Falcon II Outdoor 2 heater

1 = Screws on the top of front media guide

Falcon II Outdoor 4 heater

1 = Screws on the top of front media guide