Specifications

Falcon II Outdoor series printers – Maintenance Manual

AP-74065, Rev. 1.0, 21/11/03

4.2.5. Removing the carriage cover

Caution :

Please note that this cover is only on a Falcon II Outdoor (2 heaters) printer.

Step 1 : Remove the I/H cover.

Step 2 : Remove side cover R.

Step 3 : Remove side cover L.

Step 4 : Remove the front cover.

Step 5 : Remove the 4 screws fixing the carriage cover.

Step 6 : Remove the carriage cover.

1 = Carriage cover 2 = Screws (M3x6) fixing the carriage cover

Step 7 : Reinstall all parts in the opposite order of the removal procedure.