Specifications

Falcon II Outdoor series printers – Maintenance Manual
331
AP-74065, Rev. 1.0, 21/11/03
5 Other functions are not
performing correctly.
a problem. assembly Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly
(1) Check if CW
adjustments are
made correctly.
• Make adjustments.
→ CW adjustment
menu
(2) Check the top &
bottom adjustments
• Make adjustments.
→ Top & Bottom
adjustment menu
(3) The program
ROM may have
failed.
• Upgrade the
firmware version
→ Firmware
installation
6 The printing position has been
misaligned.
(4) The Mainboard
assembly may have
a problem.
• Replace the
Mainboard
assembly
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_ DRV board
assembly and
cooling fan
assembly
7 A portion of the data has not
been drawn (is missing).
(1) The program
ROM may have
failed.
• Upgrade the
firmware version.
→ Firmware
installation
8 Garbled characters or printings
are produced.
(2) Check the T
fence for
contamination and
bends.
• If contaminated
with grease and
dusts, wipe with a
dry cloth.
• If contaminated
with ink, wipe with a
lightly dampened
cloth and then with
a dry cloth.
•If contamination is
severe, replace the
T fence.
→ Replacing the T
fence