Specifications

Falcon II Outdoor series printers – Maintenance Manual
296
AP-74065, Rev. 1.0, 21/11/03
(1) Check the
cover sensor via
“Test/Sensor” of
the self-diagnostic
function.
• Make sure that
the connection of
the cover sensor
assembly is good.
• Mainboard : J155
– J156
→ Sensor Menu
(2) The cover
sensor assembly
may be damaged.
• Replace the
cover sensor
assembly.
→ Replace the
cover R sensor
assembly and the
cover L sensor
assembly.
10 E 074 Error
Cover
Trouble occurred in
the cover sensor.
(3) The Mainboard
assembly may
have a problem.
• Replace the
Mainboard
assembly.
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
(1) Make sure that
the connections of
the head tape
power cables are
good.
•Redo the
connections of the
following
connectors.
• CR board : J217
– J232
• Reset the head
error
→ Replacing the
CR board
assembly.
→ Counter
initialization menu
(2) Make sure that
the connections of
the CR tape power
cables are good.
•Redo the
connections of the
following
connectors.
• CR board : J201
– J216
• Reset the head
error
→ Replacing the
CR board
assembly
→ Counter
initialization menu
(3) The print head
may be damaged.
•Replace the print
head assembly
→ Replacing the
print head
assembly and
head tape power
cable.
→ Counter
initialization menu
11 E 075 Error
Head
OverCurrent
Trouble occurred
during printer
operation due to an
overload of the print
head.
(4) The CR board
assembly may be
damaged.
• Replace the CR
board assembly
• Reset the head
error
→ Replacing the
CR board
assembly
→ Counter
initialization menu