Specifications

Falcon II Outdoor series printers – Maintenance Manual
293
AP-74065, Rev. 1.0, 21/11/03
3 E069 error
Paper feed
timeout
Timeout occurred
on paper travel (X-
axis) during
operation.
Displayed when the
pressure roller has
not reached the
commanded
position.
(3) Check
“Encoder:PF”
under
“Test:Encoder” of
self-diagnosis
function.
→ Encoder Menu
4 E071 error PF
overcurrent
An overload
occurred in the PF
motor (X-axis)
during operation.
(4) PF motor
assembly may be
damaged.
(5) Mainboard
assembly may be
damaged.
• Replace PF
motor assembly
• Replace
Mainboard
assembly
→ Replacing PF
Motor Assembly
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
5 E 066 Error
CR Motor
Trouble occurred in
the CF motor (Y-
axis) during
operation.
Displayed when the
motor commanded
value and feedback
from the encoder
are significantly
different.
(1) Check the
trouble history via
“Test:Record” of
the self-diagnostic
function
-
→ History Menu
6 E 068 Error
CR Encoder
Trouble occurred in
the head travel (Y-
axis) during
operation.
Displayed when
there is no feedback
from the encoder.
(2) With the power
supply off, move
the carriage side to
side to check for
jamming.
→ Refer to Error
E072
• Clean and
lubricate the rollers
of the CR rail.
→ Lubrication /
Bonding