Specifications

Falcon II Outdoor series printers – Maintenance Manual
268
AP-74065, Rev. 1.0, 21/11/03
8.3.1. Service by end-user
Perform periodical inspections according to the table below.
N° Part number Quantity Action
1 DF-43637 + DF-43643 4+1 Replace the wipers and sponge.
2 DF-43694 + DF-35399 2+1 Replace the sponge at the back of the capping
station.
3 / / Clean the wipers.
4 / / Clean caps in the maintenance station.
5 / / Clean around the bottom of the heads.
(NOT the nozzle plate)
Month
N°
1 2 3 4 5 6 7 8 9 10 11 12
1 X X
2 X X X X
3 WEEKLY
4 WEEKLY
5 WEEKLY
8.3.2. Service by authorised Mutoh technician
Perform periodical inspections according to the table below.
N° Part number Quantity Action
1 MY-42110 4 Replace the dampers.
2 MY-41405 2 Replace the pumps.
3 MY-35380 + DF-43637 1+4 Replace wiper arm and wipers.
4 ME-18280 4 x 0.8 m Replace the tubing from the pumps to the waste
bottle
5 MY-35085 + ME-80385 + ME-60014 1+ 1 m +1 Replace the right spitting box + tube + L
connection
6 MY-80627 1 Replace the capping station.
7 / / Apply grease on head up-down cams.
8 / / Apply grease on Y-motor belt.
9 / / Apply grease on roller path carriage.
10 / / Apply grease on capping station camm + gears.
11 / / Clean the maintenance station area.
12 / / Remove dust in fan area underneath print
platform.