Specifications

Falcon II Outdoor series printers – Maintenance Manual
264
AP-74065, Rev. 1.0, 21/11/03
Step 5 : Connect up the tubing for pump 4 as shown in the figure below.
1 = Tube connecting to waste fluid tube 2 = Tube connecting to cap 5
3 = Tube connecting to cap 8
Step 6 : Insert in the waste fluid tubes from the pumps a piece of 15 cm tube (DF-43951).
1 = piece of tube (15 cm)
Step 7 : Stick the locking wire saddle onto side plate F.
Step 8 : Bundle the tubes and connectors together in the locking wire saddle.
Step 9 : Bundle the waste fluid tubes in the large waste fluid tube.