Specifications

Falcon II Outdoor series printers – Maintenance Manual
257
AP-74065, Rev. 1.0, 21/11/03
Step 5 : Remove the pump assemblies.
Step 6 : Reinstall the new pump assemblies.
Step 7 : Reconnect the tubes.
50” or 64” Falcon II Outdoor 2 heater 50” or 64” Falcon II Outdoor 4 heater
(2) For 87 inch spec
Notes :
¾ When the pump assembly has been installed to the main body, the pumps are
"pump 1", "pump 2", "pump 3" and "pump 4" in sequence from left to right, viewed
from the front.
1 = Pump 1 2 = Pump 2
3 = Pump 3 4 = Pump 4
Step 1 : Remove the maintenance cover.