Specifications

Falcon II Outdoor series printers – Maintenance Manual
160
AP-74065, Rev. 1.0, 21/11/03
5.4.7. History Menu
This menu is used to check the maintenance history and serious error history.
* Elec. *
F1 →
Maintenance Error
← F2
(1) Maintenance history
Maintenance history for the following parts is displayed.
¾ Waste liquid tank capacity (#)
¾ Number of cuts (#)
¾ Number of wipes of the cleaner head (#)
¾ Number of rubs of the cleaner head (#)
¾ Number of drives of the CR motor (#)
¾ Number of drives of the PF motor (#)
¾ Number of printing copies (#)
¾ Number of cleanings (#)
¾ Discharge amount of head ink 1 (A, B nozzles), M dot
¾ Discharge amount of head ink 2 (A, B nozzles), M dot
¾ Discharge amount of head ink 3 (A, B nozzles), M dot
¾ Discharge amount of head ink 4 (A, B nozzles), M dot
¾ Cutter solenoid down times (#)
Notes :
¾ For the CR motor drive count, 1 pass becomes 1 count.
¾ For the PF motor drive count, 10 meters travel becomes 1 count.
¾ For 87-inch specifications, the discharge amount of head ink 5 to 8 (A, B nozzles)
are added.
* Maintenance *
WasteInk 00000000 Waste liquid tank capacity
Cut 00000000 Number of cuts
(1/9)
* Maintenance *
Wiper 00000000 Number of wipes of the cleaner head
Rubbing 00000000 Number of rubs of the cleaner head
(2/9)
* Maintenance *
CR Motor 00000000 Number of drives of the CR motor
PF Motor 00000000 Number of drives of the PF motor
(3/9)