Specifications

Falcon II Outdoor series printers – Maintenance Manual
138
AP-74065, Rev. 1.0, 21/11/03
4.11.2. Replacing the waste fluid bottle assembly (Falcon II Outdoor 4H)
Notes :
¾ When replacing the waste fluid bottle assembly, be sure to perform following
operation to clear the counter. "High ink initialization" or " Cleaning initialization":
refer to "Counter Initialization Menu"
Step 1 : Remove the waste fluid bottle assembly.
Caution :
Waste ink will remain inside the tubes. Be careful that the ink is not spilled from the tube
onto the printer or items close to the printer.