Specifications

Falcon II Outdoor series printers – Maintenance Manual
136
AP-74065, Rev. 1.0, 21/11/03
Step 4 : Slide the cartridge frame assembly in the direction of the arrow to remove it.
Step 5 : Replace the cartridge frame assembly.
Step 6 : Reinstall all parts in the opposite order of the removal procedure.
(4) Replacing the ink sensor assembly (ink NOT sensor, ink END sensor)
Step 1 : Remove the I/H assembly.
Step 2 : Remove the cables from the I/H assembly clamp.
Step 3 : Remove the cartridge frame assembly.
Step 4 : Remove the screw fixing the ink END sensor.
1 = Ink END sensor 2 = Screw (M3x10) fixing the ink END sensor
Step 5 : Remove the ink END sensor.
Step 6 : Remove the screw fixing the Ink NOT sensor to the Cartridge frame assembly.
1 = Ink NOT sensor 2 = Screw (M2x8) fixing the ink NOT sensor
Step 7 : Remove the ink NOT sensor.
Step 8 : Replace the ink sensor assembly.