Specifications

Falcon II Outdoor series printers – Maintenance Manual
124
AP-74065, Rev. 1.0, 21/11/03
Step 8 : Remove the connector and tube from the maintenance assembly.
1 = tube connections
Notes :
¾ There is some remaining ink in the tubes. Be careful that the ink is not spilled from
the tube onto the printer or items close to the printer.
Step 9 : Remove the 6 screws fixing the maintenance assembly.
1 = Waste fluid receptacle 2 = Maintenance assembly
3 = Screws (M3x8) fixing the maintenance assembly
Step 10 : Replace the maintenance assembly.