Specifications

Falcon II Outdoor series printers – Maintenance Manual
120
AP-74065, Rev. 1.0, 21/11/03
1 = Applying position of the screw lock
Step 7 : Perform head height adjustment according to "Head height adjustment".
4.7.8.2. B. Replacing the cursor roller assembly (6 high-load bearings) : open bearing type
Step 1 : Follow the instructions in "Replacing the CR cursor assembly " to remove the CR cursor assembly.
Step 2 : Remove the side cursor roller assemblies and B cursor axises together with flat-head driver or another tool.
1 = CR cursor assembly (MY-43272) 2 = B cursor axis
Step 3 : Remove the E ring fixing the cursor roller assembly (MY-43272) of downside.
1 = CR cursor assembly (MY-43272) 2 = E ring fixing the cursor roller assembly.
Step 4 : Replace the cursor roller assembly (MY-43272).