Specifications

Falcon II Outdoor series printers – Maintenance Manual
118
AP-74065, Rev. 1.0, 21/11/03
4.7.8. Replacing the cursor roller assembly
Notes :
¾ Remove following cover before replacing the Cursor roller assembly.
 Side cover R: refer to "Removing side cover R"
 Side cover L: refer to "Removing side cover L"
 Front cover: refer to "Removing the front cover"
 Carriage cover: refer to "Removing the carriage cover"
 Y rail cover: refer to "Removing the Y rail cover"
 Head cover: refer to "Removing the head cover"
4.7.8.1. Replacing the cursor roller assembly (upper 2 cursor rollers)
Step 1 : Follow the instructions in "Replacing the CR cursor assembly " to remove the CR cursor assembly.
Step 2 : Remove the E ring fixing the cursor roller assembly (KY-80040).
1 = CR cursor assembly (KY-80040) 2 = E ring fixing the cursor roller assembly.
Step 3 : Replace the cursor roller assembly (KY-80040).
Step 4 : Reinstall all parts in the opposite order of the removal procedure.
Step 5 : Perform head height adjustment according to "Head height adjustment".
4.7.8.2. A. Replacing the cursor roller assembly (6 high-load bearings) : Large bearing type
Step 1 : Follow the instructions in "Replacing the CR cursor assembly " to remove the CR cursor assembly.
Step 2 : Remove the side cursor roller assemblies and B cursor axises together with flat-head driver or another tool.
1 = CR cursor assembly (KY-80040) 2 = B cursor axis