Specifications

Falcon II Outdoor series printers – Maintenance Manual
112
AP-74065, Rev. 1.0, 21/11/03
4.7.4. Replacing the CR board assembly
Notes :
¾ To replace the board and connect or disconnect the FFC type cable, you should
leave the plug disconnected from the power socket for a while. Otherwise, over-
current could be generated and damage board
¾ Remove following covers before replacing the CR board assembly.
 Side cover R: refer to "Removing side cover R"
 Side cover L: refer to "Removing side cover L"
 Front cover: refer to "Removing the front cover"
 Carriage cover: refer to "Removing the carriage cover"
 Y rail cover: refer to "Removing the Y rail cover"
Step 1 : Remove the 8 screws fixing the CR cover.
1 = CR cover 2 = Screws (M3x8) fixing the CR cover
Step 2 : Remove following connectors from the CR board.
N° Connector N° # of pins Colour Connected to Remarks
1 J201 30 White or Black Mainboard Lock type or Plug-in
2 J202 30 White or Black Mainboard Lock type or Plug-in
3 J203 30 White or Black Mainboard Lock type or Plug-in
4 J204 30 White or Black Mainboard Lock type or Plug-in
5 J205 30 White or Black Mainboard Lock type or Plug-in
6 J206 30 White or Black Mainboard Lock type or Plug-in
7 J207 30 White or Black Mainboard Lock type or Plug-in
8 J208 30 White or Black Mainboard Lock type or Plug-in
9 J209 30 White or Black Mainboard Lock type or Plug-in
10 J210 30 White or Black Mainboard Lock type or Plug-in
11 J211 30 White or Black Mainboard Lock type or Plug-in
12 J212 30 White or Black Mainboard Lock type or Plug-in
13 J213 30 White or Black Mainboard Lock type or Plug-in
14 J214 30 White or Black Mainboard Lock type or Plug-in
15 J215 30 White or Black Mainboard Lock type or Plug-in
16 J216 30 White or Black Mainboard Lock type or Plug-in
17 J217 21 White or Black I160B head