Specifications

Falcon II Outdoor series printers – Maintenance Manual
101
AP-74065, Rev. 1.0, 21/11/03
Step 4 : Remove the 2 screws fixing the tube clamp.
1 = CR tape power cable 2 = Steel bearer
3 = Cable push plate 4 = Screws fixing cable push plate (M3x8)
5 = Screws fixing tube clamp (M3x8)
Step 5 : Completely remove tube bundles 1 and 2.
1 = Tube bundle 2 = Tube bundle 2
Step 6 : Remove the 4 screws fixing the tube clamp.
Step 7 : Remove the tube clamp.
Step 8 : Remove the coupling screws, O-ring and ink tube from the coupling.
Step 9 : Replace the ink tube.
Step 10 : Remove the 2 screws fixing the cable clamp.
Step 11 : Replace the steel bearing.
Step 12 : Replace the tube guide.
Step 13 : Remove the pipe clamp.