Technical data

��

              

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

��

         

1 AES/EBU IN

This input interface receives a balanced, digital audio or empty frame

signal in AES/EBU format, electrically based on the specifications of

the AES 3-1992 standard (R1997). The input impedance is 110Ω (XLR

connector, female).

1 POWER

This red LED lights up when the device is turned on using the main switch

at the rear (POWER) and the country-specific mains voltage is supplied.

2 INPUT STATUS

These four red LEDs indicate the signal status for the respective digital

input.

3 LOCK STATUS

These two blue LEDs indicate the lock status of the complete unit in

relation to a reference clock source.

4 SINGLE / MASTER

With this switch, the two playback functions of the master output can be

switched over.

5 MONITOR

These five green LEDs indicate which of the inputs is currently routed to the

monitor output.

6 SELECT

With this button, each input and the master output may be routed to the

monitor output for pre-listening.

7 VOLUME

With this dial, the output volume for the monitor output can be

individually regulated.

8 MONITOR OUT

This is the monitor output used for connecting headphones (stereo phone

jack, Ø 6,3mm).

SMART MERGE rear panel

CONTROL ELEMENTS AND CONNECTIONS

SMART MERGE front panel

Consult the »Wiring the Connections« section

of the appendix for more information on the

wiring of all connections.

6 7 854321