System information
Button Description
Channel Press the left or right arrow button to scroll the channels 1 unit at a
time.
For example, if tracks 1-8 are currently displayed, pressing the right
arrow will change to tracks 2-9.
Hold the Option button while pressing either Channel button to
change track order. For example, if track two is selected and you
press Option+ < Channel, track two becomes track one. Conversely, if
track one is selected and you press Option + Channel >, track one
becomes track two.
Flip Press to exchange the behavior of the fader and V-Pot when allowed.
Video Press to toggle audio and video modes.
For example, you press the Pan/Fade button in audio mode, you can
perform audio track panning with the V-Pot.
If you press the button in video mode, you can adjust fade-to-color
settings if the Automation button in the Audio/Video section is
selected and the track is in Automation Write (Touch) or
Automation Write (Latch) mode.
Display buttons
The Display buttons control the Mackie Control LCD display.
Button Description
Meters/Values When you're working with audio tracks or busses, press to display
meters or numeric values. Even in Meters mode, numeric values are
displayed when you edit a value.
In Audio mode, hold the Shift button in the Modifiers section while
pressing the Meters/Values button to toggle control of tracks, busses,
or tracks and busses.
n Press once to show audio tracks.
n Press again to show audio tracks.
n Press again to show busses.
n Press again to show tracks and busses.
Time Fmt
Zero
Press and hold to display the current time format. Turn V-Pot 8 while
holding the button to change the format.
Hold the Shift button in the Modifiers section while pressing the Time
Fmt/Zero button to set the current cursor position to zero.
538CHAPTER 30