System information
6. Select the Render loop region only check box if you want to export only the portion of your project
that you selected in step 1.
7. Select the Delete file after print check box if you want to delete the rendered file from your hard
drive after successfully exporting it to disc.
If the export fails, the rendered file remains on disk so you can adjust your XDCAM device settings
and export again without having to render again.
8. Select the Use project output rotation setting check box if you're rendering a rotated project and
want to use the Output rotation setting from the Project Properties dialog for your rendered file.
When the check box is cleared, the media is rotated according to its Media Properties setting, but
the project itself is unrotated—you can use this setting to proof your project on an unrotated
display.
9. Click OK. Your project is rendered and transferred to your camera or deck.
Exporting a rendered file
Use this procedure when you have a rendered MXF file that you want to save to an XDCAM disc.
If you are exporting a rendered file to an XDCAM disc, the file must precisely conform to the target
disc format, or the export will fail.
1.
Choose File >Export>XDCAM Disc (or click the Export Video to XDCAMDisc button in the
XDCAM Explorer window). The Export Video to XDCAM Disc dialog is displayed.
2. The XDCAM Device box displays the current XDCAM camera or deck.
If you need to choose a different XDCAM device or transfer method, click the Device button. For
more information, see "Setting up an XDCAM Device" on page 406.
For information about using your camera or deck, please refer to its documentation.
3. Choose the file you want to export:
a. Select the Use an existing file radio button.
b. In the File path box, type the path to the file you want to print, or click the Browse button to
choose the file you want to print.
4. Click OK. The selected file is transferred to your camera or deck.
WORKING WITH XDCAM VIDEO415