System information
b. Click the Pre/Post in each track's Sends control region to select Pre Volume Send mode.
When bus sends are pre-volume, the cue mix is independent of the main mix.
c. Drag the fader on each track's channel strip to adjust the level of the track that is sent to the
headphone mix bus. If multiple tracks are selected, you can adjust their bus-send levels at
the same time.
Right-click the bus send fader in the track header in the main application window and
choose Link to Main Track Pan from the shortcut menu. When this command is selected,
track panning is applied to bus sends (including pan position and panning mode). When
Link to Main Track Pan is not selected, the track sends a center-panned stereo signal using
the track's current panning mode.
If you want to exclude a track from the headphone mix, just set its send to -Inf.
You can use the channel strip for the headphone mix bus in the Mixing Console window to
adjust the level of the headphone mix, add effects to the mix, or mute and solo the mix.
If you need to create multiple mixes, you can add up to 26 busses to the Mixing Console
window and repeat the procedure described in this topic.
384CHAPTER 15